Split Windows client bootstrap profiles

README.md

@@ -111,13 +111,28 @@ ports remain private even though the VM owns a public IP.
 Never disable the built-in Microsoft password Credential Provider. It is the
 supported recovery path if a third-party provider fails to load.
 
-For a clean machine, the supported entry points are the release packages:
+For a clean machine, choose the release package that matches the workstation:
+
+- `sgu-windows10-legacy-client-bootstrap-VERSION.zip` for Windows 10;
+- `sgu-windows11-client-bootstrap-VERSION.zip` for Windows 11, including the
+  modern Azure P2S/pre-logon flow.
+
+Both use the same direct-lab entry point:
 
 ```bat
 Start-SguServerBootstrap.cmd 192.168.50.10
-Start-SguClientEnrollment.cmd 192.168.50.10
+Start-SguClientEnrollment.cmd 192.168.50.10 192.168.50.11
 ```
 
+El segundo argumento es la IP fija, única, del cliente en la red privada. Si se
+omite y ese adaptador todavía usa una dirección `169.254.x.x`, el enrolador la
+solicita de forma interactiva. En equipos con dos NIC selecciona el adaptador
+sin puerta de enlace y conserva el `Default Switch` para Internet.
+
+El manifiesto identifica el perfil `Windows10Legacy` o `Windows11Modern` y el
+bootstrap valida el build antes de hacer cambios. Las correcciones comunes se
+mantienen en ambos; Windows 11 conserva además sus puntos de entrada modernos.
+
 Linux clients are enrolled through their native PAM/SSSD stack instead of the
 Windows Credential Provider:
 

docs/azure-vpn-deployment.md

@@ -122,7 +122,7 @@ $w11 = .\scripts\New-SguAzureP2sCertificates.ps1 -ClientName 'Windows11'
 
 Copie a la VM Windows 11 de Hyper-V:
 
-- `sgu-client-bootstrap-VERSION.zip` extraído;
+- `sgu-windows11-client-bootstrap-VERSION.zip` extraído;
 - `$vpn.PackagePath`;
 - `$w11.ClientCertificatePath`;
 - `sgu-azure-p2s-root.cer`.

docs/bootstrap-recovery.md

@@ -96,13 +96,29 @@ Se admiten Pro, Enterprise y Education. Windows Home no puede unirse a Active
 Directory local ni actuar como host RDP; el bootstrap lo detecta antes de cambiar
 el equipo y explica que se debe actualizar la edición.
 
-1. Descargar y extraer `sgu-client-bootstrap-VERSION.zip`.
+1. Descargar y extraer el paquete correspondiente:
+   `sgu-windows10-legacy-client-bootstrap-VERSION.zip` o
+   `sgu-windows11-client-bootstrap-VERSION.zip`.
 2. Ejecutar con la IP fija actual del controlador de dominio:
 
 ```bat
-Start-SguClientEnrollment.cmd 192.168.50.10
+Start-SguClientEnrollment.cmd 192.168.50.10 192.168.50.11
 ```
 
+El primer argumento es el controlador de dominio y el segundo es una dirección
+IPv4 fija, libre y exclusiva del cliente en la red privada. Si se omite la IP
+del cliente, el bootstrap la solicita cuando el adaptador sólo tiene APIPA
+(`169.254.x.x`). En una VM con Internet por `Default Switch` y otra NIC para
+`Laboratorio AD`, el bootstrap elige la NIC sin puerta de enlace y no cambia la
+ruta predeterminada. Si falla, la ventana elevada permanece abierta y el mismo
+error queda en `C:\ProgramData\SGU\Bootstrap\Client\latest-error.log`.
+
+Cada manifiesto fija su perfil y evita cruzar paquetes: Windows 10 utiliza
+`Windows10Legacy` (build menor a 22000) y Windows 11 `Windows11Modern` (build
+22000 o posterior). El ZIP moderno conserva tanto el enrolamiento directo como
+Azure P2S/pre-logon; el ZIP legado contiene el flujo directo. El código común y
+las garantías de seguridad son idénticos.
+
 Después de UAC, se solicita interactivamente la credencial autorizada para unir
 equipos. La contraseña existe sólo en memoria. El bootstrap:
 
@@ -128,6 +144,8 @@ Para elegir adaptador o nombre del equipo explícitamente:
 powershell.exe -NoProfile -ExecutionPolicy Bypass `
   -File .\Invoke-SguClientBootstrap.ps1 `
   -DomainControllerIPv4Address 192.168.50.10 `
+  -ClientIPv4Address 192.168.50.11 `
+  -ClientPrefixLength 24 `
   -NetworkInterfaceAlias 'Ethernet' `
   -NewComputerName 'LCI-101'
 ```

docs/client-enrollment.md

@@ -1,10 +1,14 @@
 # Enrolamiento obligatorio de clientes SGU
 
-Para una instalación limpia de Windows se prefiere el único punto de entrada
+Para una instalación limpia se selecciona primero el ZIP correspondiente:
-empaquetado:
+
+- `sgu-windows10-legacy-client-bootstrap-VERSION.zip` para Windows 10;
+- `sgu-windows11-client-bootstrap-VERSION.zip` para Windows 11.
+
+Ambos conservan el punto de entrada directo:
 
 ```bat
-Start-SguClientEnrollment.cmd 192.168.50.10
+Start-SguClientEnrollment.cmd 192.168.50.10 192.168.50.11
 ```
 
 Este comando realiza el intercambio de certificados descrito abajo sin mover
@@ -12,6 +16,20 @@ una clave privada y luego ejecuta la transacción proveedor-primero. Las
 instrucciones completas están en
 [`bootstrap-recovery.md`](bootstrap-recovery.md).
 
+El primer argumento es la IP fija del controlador; el segundo es una IP fija y
+única para el cliente en la misma subred. Si el segundo se omite y la NIC
+privada no tiene una IP válida, se solicita en pantalla. El bootstrap prefiere
+la única NIC activa sin puerta de enlace para no reemplazar el adaptador de
+Internet. Ante cualquier error conserva la ventana y escribe el diagnóstico en
+`C:\ProgramData\SGU\Bootstrap\Client\latest-error.log`.
+
+El manifiesto contiene el perfil `Windows10Legacy` o `Windows11Modern` y el
+bootstrap rechaza un ZIP que no corresponda al build instalado. El paquete de
+Windows 11 conserva además `Start-SguAzureClientEnrollment.cmd` y el instalador
+P2S de equipo; el legado de Windows 10 se limita al transporte directo del
+laboratorio. Credential Provider, mTLS, cuenta `alumno`, RustDesk, monitorización
+y autorreparación siguen saliendo de la misma base de código.
+
 El flujo administrado instala y valida el Credential Provider **antes** de
 ejecutar `Add-Computer`. La pertenencia al dominio es el último cambio; si falta
 el runtime, un certificado, el registro COM, la directiva predeterminada o la

scripts/Invoke-SguClientBootstrap.ps1

@@ -3,11 +3,16 @@
 param(
     [ipaddress]$DomainControllerIPv4Address,
     [string]$NetworkInterfaceAlias,
+    [ipaddress]$ClientIPv4Address,
+    [ValidateRange(1, 32)]
+    [int]$ClientPrefixLength = 24,
     [PSCredential]$DomainCredential,
     [string]$DomainName = 'lci.lasalle.mx',
     [string]$DomainNetbios = 'LCI',
     [string]$ComputerOuDn,
     [string]$NewComputerName,
+    [ValidateSet('Auto', 'Windows10Legacy', 'Windows11Modern')]
+    [string]$CompatibilityProfile = 'Auto',
     [ValidateSet('Direct', 'AzureP2S')]
     [string]$ConnectivityMode = 'Direct',
     [string]$VpnConnectionName = 'SGU Azure P2S',
@@ -16,6 +21,7 @@ param(
     [securestring]$VpnClientCertificatePfxPassword,
     [string]$VpnClientRootCertificatePath,
     [string[]]$AzureNetworkPrefixes = @('10.77.0.0/16'),
+    [switch]$PauseOnError,
     [switch]$SkipRestart
 )
 
@@ -24,6 +30,35 @@ $brokerRecordName = 'sgu-auth'
 $brokerDnsName = "$brokerRecordName.$DomainName"
 $brokerEndpoint = "https://${brokerDnsName}:8443/v1/authenticate"
 $temporaryRoot = Join-Path $env:ProgramData ("SGU\Bootstrap\Client-" + [Guid]::NewGuid().ToString('N'))
+$bootstrapLogRoot = Join-Path $env:ProgramData 'SGU\Bootstrap\Client'
+$bootstrapErrorLog = Join-Path $bootstrapLogRoot 'latest-error.log'
+
+trap {
+    $failure = $_
+    $failureText = @(
+        "SGU client enrollment failed at $((Get-Date).ToString('s')).",
+        '',
+        $failure.Exception.Message,
+        '',
+        $failure.ScriptStackTrace
+    ) -join [Environment]::NewLine
+    try {
+        New-Item -ItemType Directory -Path $bootstrapLogRoot -Force | Out-Null
+        [IO.File]::WriteAllText($bootstrapErrorLog, $failureText, [Text.UTF8Encoding]::new($false))
+    }
+    catch {
+        # Keep the original enrollment error when diagnostics cannot be written.
+    }
+
+    Write-Host ''
+    Write-Host 'SGU client enrollment did not complete.' -ForegroundColor Red
+    Write-Host $failure.Exception.Message -ForegroundColor Red
+    Write-Host "Diagnostic log: $bootstrapErrorLog" -ForegroundColor Yellow
+    if ($PauseOnError -and [Environment]::UserInteractive) {
+        Read-Host 'Press ENTER to close this window' | Out-Null
+    }
+    exit 1
+}
 
 function Assert-Administrator {
     $identity = [Security.Principal.WindowsIdentity]::GetCurrent()
@@ -52,6 +87,7 @@ function Assert-PackageManifest {
             throw "Bootstrap package integrity check failed: $($entry.Path)"
         }
     }
+    return $manifest
 }
 
 function Resolve-ClientInterfaceAlias {
@@ -62,21 +98,133 @@ function Resolve-ClientInterfaceAlias {
         return $RequestedAlias
     }
 
-    $defaultRoute = Get-NetRoute -AddressFamily IPv4 -DestinationPrefix '0.0.0.0/0' `
-        -ErrorAction SilentlyContinue |
-        Sort-Object RouteMetric,InterfaceMetric |
-        Select-Object -First 1
-    if ($defaultRoute) {
-        return [string](Get-NetAdapter -InterfaceIndex $defaultRoute.InterfaceIndex).Name
-    }
-
     $upAdapters = @(Get-NetAdapter | Where-Object Status -eq 'Up')
+    $withoutDefaultGateway = @($upAdapters | Where-Object {
+        -not (Get-NetIPConfiguration -InterfaceIndex $_.ifIndex).IPv4DefaultGateway
+    })
+    if ($withoutDefaultGateway.Count -eq 1) {
+        return [string]$withoutDefaultGateway[0].Name
+    }
     if ($upAdapters.Count -eq 1) {
         return [string]$upAdapters[0].Name
     }
 
     $aliases = ($upAdapters.Name | Sort-Object) -join ', '
-    throw "Could not select a network adapter. Re-run with -NetworkInterfaceAlias. Available adapters: $aliases"
+    throw "Could not select the private domain adapter unambiguously. Re-run with -NetworkInterfaceAlias. Available adapters: $aliases"
+}
+
+function Test-IPv4AddressesSharePrefix {
+    param(
+        [Parameter(Mandatory)][ipaddress]$FirstAddress,
+        [Parameter(Mandatory)][ipaddress]$SecondAddress,
+        [Parameter(Mandatory)][ValidateRange(1, 32)][int]$PrefixLength
+    )
+
+    if ($FirstAddress.AddressFamily -ne [Net.Sockets.AddressFamily]::InterNetwork -or
+        $SecondAddress.AddressFamily -ne [Net.Sockets.AddressFamily]::InterNetwork) {
+        return $false
+    }
+
+    $firstBytes = $FirstAddress.GetAddressBytes()
+    $secondBytes = $SecondAddress.GetAddressBytes()
+    $remainingBits = $PrefixLength
+    for ($index = 0; $index -lt 4; $index++) {
+        $bits = [Math]::Min(8, $remainingBits)
+        $mask = if ($bits -eq 0) {
+            0
+        }
+        elseif ($bits -eq 8) {
+            255
+        }
+        else {
+            256 - [int][Math]::Pow(2, 8 - $bits)
+        }
+        if (($firstBytes[$index] -band $mask) -ne ($secondBytes[$index] -band $mask)) {
+            return $false
+        }
+        $remainingBits -= $bits
+    }
+    return $true
+}
+
+function Assert-UsableClientIPv4Address {
+    param(
+        [Parameter(Mandatory)][ipaddress]$Address,
+        [Parameter(Mandatory)][ipaddress]$DomainControllerAddress,
+        [Parameter(Mandatory)][ValidateRange(1, 32)][int]$PrefixLength
+    )
+
+    if ($Address.AddressFamily -ne [Net.Sockets.AddressFamily]::InterNetwork) {
+        throw "The SGU client address '$Address' must be IPv4."
+    }
+    if ($Address.IPAddressToString -eq $DomainControllerAddress.IPAddressToString) {
+        throw 'The SGU client and domain controller cannot use the same IPv4 address.'
+    }
+    if ($Address.IPAddressToString -match '^(0\.|127\.|169\.254\.|22[4-9]\.|23\d\.)') {
+        throw "The SGU client address '$Address' is not usable on the private domain network."
+    }
+    if (-not (Test-IPv4AddressesSharePrefix -FirstAddress $Address `
+            -SecondAddress $DomainControllerAddress -PrefixLength $PrefixLength)) {
+        throw "The SGU client address '$Address/$PrefixLength' is not on the same network as domain controller $DomainControllerAddress."
+    }
+}
+
+function Set-ClientDomainAddress {
+    param(
+        [Parameter(Mandatory)][string]$InterfaceAlias,
+        [Parameter(Mandatory)][ipaddress]$DomainControllerAddress,
+        [ipaddress]$RequestedAddress,
+        [Parameter(Mandatory)][ValidateRange(1, 32)][int]$PrefixLength
+    )
+
+    $adapter = Get-NetAdapter -Name $InterfaceAlias -ErrorAction Stop
+    $matchingAddress = Get-NetIPAddress -InterfaceIndex $adapter.ifIndex -AddressFamily IPv4 `
+        -ErrorAction SilentlyContinue |
+        Where-Object {
+            $_.AddressState -eq 'Preferred' -and
+            $_.IPAddress -notmatch '^(127\.|169\.254\.)' -and
+            (Test-IPv4AddressesSharePrefix -FirstAddress ([ipaddress]$_.IPAddress) `
+                -SecondAddress $DomainControllerAddress -PrefixLength $PrefixLength)
+        } |
+        Select-Object -First 1
+
+    if (-not $RequestedAddress -and $matchingAddress) {
+        return [ipaddress]$matchingAddress.IPAddress
+    }
+    if (-not $RequestedAddress) {
+        $RequestedAddress = [ipaddress](Read-Host "Fixed IPv4 address for this SGU client on '$InterfaceAlias'")
+    }
+    Assert-UsableClientIPv4Address -Address $RequestedAddress `
+        -DomainControllerAddress $DomainControllerAddress -PrefixLength $PrefixLength
+
+    Set-NetIPInterface -InterfaceIndex $adapter.ifIndex -AddressFamily IPv4 -Dhcp Disabled
+    $existingAddresses = @(Get-NetIPAddress -InterfaceIndex $adapter.ifIndex -AddressFamily IPv4 `
+        -ErrorAction SilentlyContinue | Where-Object PrefixOrigin -ne 'WellKnown')
+    foreach ($existingAddress in $existingAddresses) {
+        if ($existingAddress.IPAddress -ne $RequestedAddress.IPAddressToString -or
+            [int]$existingAddress.PrefixLength -ne $PrefixLength) {
+            Remove-NetIPAddress -InputObject $existingAddress -Confirm:$false
+        }
+    }
+    if (-not (Get-NetIPAddress -InterfaceIndex $adapter.ifIndex -AddressFamily IPv4 `
+            -IPAddress $RequestedAddress.IPAddressToString -ErrorAction SilentlyContinue)) {
+        New-NetIPAddress -InterfaceIndex $adapter.ifIndex -AddressFamily IPv4 `
+            -IPAddress $RequestedAddress.IPAddressToString -PrefixLength $PrefixLength | Out-Null
+    }
+
+    $addressReadyDeadline = (Get-Date).AddSeconds(20)
+    do {
+        $configuredAddress = Get-NetIPAddress -InterfaceIndex $adapter.ifIndex `
+            -AddressFamily IPv4 -IPAddress $RequestedAddress.IPAddressToString `
+            -ErrorAction SilentlyContinue
+        if ($configuredAddress -and $configuredAddress.AddressState -eq 'Preferred') {
+            return $RequestedAddress
+        }
+        Start-Sleep -Milliseconds 500
+    } while ((Get-Date) -lt $addressReadyDeadline)
+
+    $observedState = if ($configuredAddress) { $configuredAddress.AddressState } else { 'Missing' }
+    throw "The SGU client address '$RequestedAddress' did not become ready on '$InterfaceAlias' within 20 seconds. Observed state: $observedState."
 }
 
 function Test-TcpPort {
@@ -103,6 +251,23 @@ function Test-TcpPort {
     }
 }
 
+function Wait-TcpPort {
+    param(
+        [Parameter(Mandatory)][ipaddress]$Address,
+        [Parameter(Mandatory)][int]$Port,
+        [int]$TimeoutSeconds = 20
+    )
+
+    $deadline = (Get-Date).AddSeconds($TimeoutSeconds)
+    do {
+        if (Test-TcpPort -Address $Address -Port $Port -TimeoutMilliseconds 2000) {
+            return $true
+        }
+        Start-Sleep -Milliseconds 750
+    } while ((Get-Date) -lt $deadline)
+    return $false
+}
+
 function Connect-SguAzureP2s {
     param([Parameter(Mandatory)][string]$ConnectionName)
 
@@ -147,7 +312,38 @@ if (-not $ComputerOuDn) {
 }
 
 $packageRoot = $PSScriptRoot
-Assert-PackageManifest -PackageRoot $packageRoot
+$packageManifest = Assert-PackageManifest -PackageRoot $packageRoot
+$manifestProfile = if ($packageManifest.PSObject.Properties['CompatibilityProfile']) {
+    [string]$packageManifest.CompatibilityProfile
+}
+else {
+    'Auto'
+}
+if ($CompatibilityProfile -ne 'Auto' -and $manifestProfile -ne 'Auto' -and
+    $CompatibilityProfile -ne $manifestProfile) {
+    throw "The requested compatibility profile '$CompatibilityProfile' does not match package profile '$manifestProfile'."
+}
+if ($CompatibilityProfile -eq 'Auto') {
+    $CompatibilityProfile = $manifestProfile
+}
+$windowsBuild = [int]$operatingSystem.BuildNumber
+if ($CompatibilityProfile -eq 'Auto') {
+    $CompatibilityProfile = if ($windowsBuild -lt 22000) {
+        'Windows10Legacy'
+    }
+    else {
+        'Windows11Modern'
+    }
+}
+if ($CompatibilityProfile -eq 'Windows10Legacy' -and $windowsBuild -ge 22000) {
+    throw "The Windows 10 legacy package cannot enroll Windows build $windowsBuild. Use the Windows 11 modern client package."
+}
+if ($CompatibilityProfile -eq 'Windows11Modern' -and $windowsBuild -lt 22000) {
+    throw "The Windows 11 modern package cannot enroll Windows build $windowsBuild. Use the Windows 10 legacy client package."
+}
+if ($CompatibilityProfile -eq 'Windows10Legacy' -and $ConnectivityMode -eq 'AzureP2S') {
+    throw 'Azure P2S pre-logon enrollment belongs to the Windows 11 modern package. Use Direct connectivity for the Windows 10 legacy package.'
+}
 $scriptsRoot = Join-Path $packageRoot 'payload\scripts'
 $providerPublishPath = Join-Path $packageRoot 'payload\credential-provider'
 $runtimeInstaller = Get-ChildItem (Join-Path $packageRoot 'payload\prerequisites') `
@@ -210,12 +406,15 @@ if ($ConnectivityMode -eq 'AzureP2S') {
 }
 else {
     $NetworkInterfaceAlias = Resolve-ClientInterfaceAlias -RequestedAlias $NetworkInterfaceAlias
+    $ClientIPv4Address = Set-ClientDomainAddress -InterfaceAlias $NetworkInterfaceAlias `
+        -DomainControllerAddress $DomainControllerIPv4Address `
+        -RequestedAddress $ClientIPv4Address -PrefixLength $ClientPrefixLength
     Set-DnsClientServerAddress -InterfaceAlias $NetworkInterfaceAlias `
         -ServerAddresses $DomainControllerIPv4Address.IPAddressToString
 }
 
-if (-not (Test-TcpPort -Address $DomainControllerIPv4Address -Port 5985)) {
+if (-not (Wait-TcpPort -Address $DomainControllerIPv4Address -Port 5985 -TimeoutSeconds 20)) {
-    throw "The domain controller at $DomainControllerIPv4Address is not accepting WinRM on TCP 5985. Run the server bootstrap first and verify the selected IP."
+    throw "The domain controller at $DomainControllerIPv4Address did not accept WinRM on TCP 5985 after 20 seconds. Run the server bootstrap first and verify the selected IP."
 }
 
 if (-not $DomainCredential) {
@@ -428,7 +627,8 @@ finally {
         Set-Item WSMan:\localhost\Client\TrustedHosts -Value $priorTrustedHosts -Force
     }
     if (-not $winRmWasRunning) {
-        Stop-Service WinRM -Force -ErrorAction SilentlyContinue
+        Stop-Service WinRM -Force -NoWait -WarningAction SilentlyContinue `
+            -ErrorAction SilentlyContinue
     }
     Remove-Item -LiteralPath $temporaryRoot -Recurse -Force -ErrorAction SilentlyContinue
     $DomainCredential = $null
@@ -443,6 +643,7 @@ if ($SkipRestart) {
         ClientCertificateRegistered = $true
         BrokerEndpoint = $brokerEndpoint
         ConnectivityMode = $ConnectivityMode
+        CompatibilityProfile = $CompatibilityProfile
         VpnConnectionName = if ($ConnectivityMode -eq 'AzureP2S') { $VpnConnectionName } else { $null }
         RestartRequired = $true
         RustDesk = if ($result) { $result.RustDesk } else { $null }

scripts/New-SguBootstrapPackages.ps1

@@ -33,7 +33,10 @@ function Write-PackageManifest {
     param(
         [Parameter(Mandatory)][string]$PackageRoot,
         [Parameter(Mandatory)][string]$PackageVersion,
-        [Parameter(Mandatory)][string]$PackageKind
+        [Parameter(Mandatory)][string]$PackageKind,
+        [ValidateSet('Windows10Legacy', 'Windows11Modern')]
+        [string]$CompatibilityProfile,
+        [string]$TargetOperatingSystem
     )
 
     $resolvedPackageRoot = (Resolve-Path -LiteralPath $PackageRoot).Path.TrimEnd('\')
@@ -48,13 +51,19 @@ function Write-PackageManifest {
             }
         })
     $manifest = [ordered]@{
-        SchemaVersion = 1
+        SchemaVersion = 2
         Product = 'SGU Credential Provider'
         PackageKind = $PackageKind
         Version = $PackageVersion
         CreatedAt = (Get-Date).ToUniversalTime().ToString('o')
         Files = $files
     }
+    if ($CompatibilityProfile) {
+        $manifest['CompatibilityProfile'] = $CompatibilityProfile
+    }
+    if ($TargetOperatingSystem) {
+        $manifest['TargetOperatingSystem'] = $TargetOperatingSystem
+    }
     [IO.File]::WriteAllText(
         (Join-Path $resolvedPackageRoot 'package-manifest.json'),
         ($manifest | ConvertTo-Json -Depth 6),
@@ -78,21 +87,28 @@ if (-not $runtimeInstaller) {
 }
 
 New-Item -ItemType Directory -Path $resolvedOutputRoot -Force | Out-Null
-$clientRoot = Join-Path $resolvedOutputRoot "sgu-client-bootstrap-$Version"
+$windows11ClientRoot = Join-Path $resolvedOutputRoot "sgu-windows11-client-bootstrap-$Version"
+$windows10ClientRoot = Join-Path $resolvedOutputRoot "sgu-windows10-legacy-client-bootstrap-$Version"
+$clientRoot = $windows11ClientRoot
 $serverRoot = Join-Path $resolvedOutputRoot "sgu-server-bootstrap-$Version"
 $linuxClientRoot = Join-Path $resolvedOutputRoot "sgu-linux-client-bootstrap-$Version"
 $azureRoot = Join-Path $resolvedOutputRoot "sgu-azure-infrastructure-$Version"
-$clientZip = "$clientRoot.zip"
+$windows11ClientZip = "$windows11ClientRoot.zip"
+$windows10ClientZip = "$windows10ClientRoot.zip"
 $serverZip = "$serverRoot.zip"
 $linuxClientZip = "$linuxClientRoot.zip"
 $azureZip = "$azureRoot.zip"
-foreach ($target in @($clientRoot,$serverRoot,$linuxClientRoot,$azureRoot,$clientZip,$serverZip,$linuxClientZip,$azureZip)) {
+foreach ($target in @(
+    $windows11ClientRoot,$windows10ClientRoot,$serverRoot,$linuxClientRoot,$azureRoot,
+    $windows11ClientZip,$windows10ClientZip,$serverZip,$linuxClientZip,$azureZip)) {
     if (Test-Path -LiteralPath $target) {
         throw "Release target already exists: $target"
     }
 }
 
-New-Item -ItemType Directory -Path $clientRoot,$serverRoot,$linuxClientRoot,$azureRoot -Force | Out-Null
+New-Item -ItemType Directory `
+    -Path $windows11ClientRoot,$windows10ClientRoot,$serverRoot,$linuxClientRoot,$azureRoot `
+    -Force | Out-Null
 $welcomeFontNames = @(
     'IndivisaTextSans-Regular.otf',
     'IndivisaTextSans-Bold.otf',
@@ -105,10 +121,6 @@ Copy-RequiredFile -Source (Join-Path $PSScriptRoot 'Invoke-SguClientBootstrap.ps
     -Destination (Join-Path $clientRoot 'Invoke-SguClientBootstrap.ps1')
 Copy-RequiredFile -Source (Join-Path $PSScriptRoot 'Start-SguClientEnrollment.cmd') `
     -Destination (Join-Path $clientRoot 'Start-SguClientEnrollment.cmd')
-Copy-RequiredFile -Source (Join-Path $PSScriptRoot 'Start-SguAzureClientEnrollment.cmd') `
-    -Destination (Join-Path $clientRoot 'Start-SguAzureClientEnrollment.cmd')
-Copy-RequiredFile -Source (Join-Path $PSScriptRoot 'Install-SguAzureP2sClient.ps1') `
-    -Destination (Join-Path $clientRoot 'Install-SguAzureP2sClient.ps1')
 $clientScripts = @(
     'Enable-LabRemoteAccess.ps1',
     'Enable-SguClientMonitoring.ps1',
@@ -141,8 +153,26 @@ foreach ($fontName in $welcomeFontNames) {
 }
 Copy-RequiredFile -Source $runtimeInstaller.FullName `
     -Destination (Join-Path $clientRoot "payload\prerequisites\$($runtimeInstaller.Name)")
-Write-PackageManifest -PackageRoot $clientRoot -PackageVersion $Version -PackageKind Client
+
-Compress-Archive -Path (Join-Path $clientRoot '*') -DestinationPath $clientZip `
+# Both Windows packages share the provider and enrollment implementation. The
+# Windows 10 artifact freezes the direct-network compatibility surface, while
+# the Windows 11 artifact adds the modern Azure P2S/pre-logon entry point.
+Copy-Item -Path (Join-Path $windows11ClientRoot '*') `
+    -Destination $windows10ClientRoot -Recurse -Force
+Copy-RequiredFile -Source (Join-Path $PSScriptRoot 'Start-SguAzureClientEnrollment.cmd') `
+    -Destination (Join-Path $windows11ClientRoot 'Start-SguAzureClientEnrollment.cmd')
+Copy-RequiredFile -Source (Join-Path $PSScriptRoot 'Install-SguAzureP2sClient.ps1') `
+    -Destination (Join-Path $windows11ClientRoot 'Install-SguAzureP2sClient.ps1')
+
+Write-PackageManifest -PackageRoot $windows10ClientRoot -PackageVersion $Version `
+    -PackageKind WindowsClient -CompatibilityProfile Windows10Legacy `
+    -TargetOperatingSystem 'Windows 10 Pro, Enterprise, or Education (build below 22000)'
+Write-PackageManifest -PackageRoot $windows11ClientRoot -PackageVersion $Version `
+    -PackageKind WindowsClient -CompatibilityProfile Windows11Modern `
+    -TargetOperatingSystem 'Windows 11 Pro, Enterprise, or Education (build 22000 or later)'
+Compress-Archive -Path (Join-Path $windows10ClientRoot '*') -DestinationPath $windows10ClientZip `
+    -CompressionLevel Optimal
+Compress-Archive -Path (Join-Path $windows11ClientRoot '*') -DestinationPath $windows11ClientZip `
     -CompressionLevel Optimal
 
 # Linux clients use their native PAM/SSSD sign-in stack rather than the Windows
@@ -242,7 +272,8 @@ Compress-Archive -Path (Join-Path $azureRoot '*') -DestinationPath $azureZip `
     -CompressionLevel Optimal
 
 $checksums = @(
-    ("{0}  {1}" -f (Get-FileHash -LiteralPath $clientZip -Algorithm SHA256).Hash, (Split-Path $clientZip -Leaf))
+    ("{0}  {1}" -f (Get-FileHash -LiteralPath $windows10ClientZip -Algorithm SHA256).Hash, (Split-Path $windows10ClientZip -Leaf))
+    ("{0}  {1}" -f (Get-FileHash -LiteralPath $windows11ClientZip -Algorithm SHA256).Hash, (Split-Path $windows11ClientZip -Leaf))
     ("{0}  {1}" -f (Get-FileHash -LiteralPath $serverZip -Algorithm SHA256).Hash, (Split-Path $serverZip -Leaf))
     ("{0}  {1}" -f (Get-FileHash -LiteralPath $linuxClientZip -Algorithm SHA256).Hash, (Split-Path $linuxClientZip -Leaf))
     ("{0}  {1}" -f (Get-FileHash -LiteralPath $azureZip -Algorithm SHA256).Hash, (Split-Path $azureZip -Leaf))
@@ -252,8 +283,10 @@ $checksumsPath = Join-Path $resolvedOutputRoot "SHA256SUMS-$Version.txt"
 
 [pscustomobject]@{
     Version = $Version
-    ClientPackage = $clientZip
+    Windows10LegacyClientPackage = $windows10ClientZip
-    ClientSha256 = (Get-FileHash -LiteralPath $clientZip -Algorithm SHA256).Hash
+    Windows10LegacyClientSha256 = (Get-FileHash -LiteralPath $windows10ClientZip -Algorithm SHA256).Hash
+    Windows11ClientPackage = $windows11ClientZip
+    Windows11ClientSha256 = (Get-FileHash -LiteralPath $windows11ClientZip -Algorithm SHA256).Hash
     LinuxClientPackage = $linuxClientZip
     LinuxClientSha256 = (Get-FileHash -LiteralPath $linuxClientZip -Algorithm SHA256).Hash
     ServerPackage = $serverZip

scripts/Publish-GiteaRelease.ps1

@@ -15,7 +15,8 @@ param(
 $ErrorActionPreference = 'Stop'
 $tagName = "v$Version"
 $assetPaths = @(
-    (Join-Path $ReleaseDirectory "sgu-client-bootstrap-$Version.zip"),
+    (Join-Path $ReleaseDirectory "sgu-windows10-legacy-client-bootstrap-$Version.zip"),
+    (Join-Path $ReleaseDirectory "sgu-windows11-client-bootstrap-$Version.zip"),
     (Join-Path $ReleaseDirectory "sgu-server-bootstrap-$Version.zip"),
     (Join-Path $ReleaseDirectory "sgu-linux-client-bootstrap-$Version.zip"),
     (Join-Path $ReleaseDirectory "sgu-azure-infrastructure-$Version.zip"),
@@ -111,7 +112,10 @@ Bootstrap reproducible para el laboratorio SGU.
 
 - **Advertencia:** el bootstrap de servidor crea un bosque nuevo. No restaura los SID, contraseñas ni relaciones de confianza del bosque anterior; para conservarlos se requiere una recuperación de bosque desde una copia de estado del sistema.
 - `sgu-server-bootstrap-$Version.zip`: crea el bosque AD/DNS, OUs, grupo RDP, GPO, recurso `Packages`, broker mTLS y administración remota; se reanuda solo después del reinicio.
-- `sgu-client-bootstrap-$Version.zip`: registra un certificado mTLS único, instala y valida el Credential Provider antes de unir el equipo al dominio, habilita RDP/WinRM y se repara al arranque.
+- `sgu-windows10-legacy-client-bootstrap-$Version.zip`: perfil directo para Windows 10 de laboratorio, con las correcciones de NIC privada, límites de cuentas locales y compatibilidad de sus APIs heredadas.
+- `sgu-windows11-client-bootstrap-$Version.zip`: perfil completo para Windows 11; conserva el enrolamiento directo y añade Azure P2S con certificado de máquina y entrada previa al inicio de sesión.
+- Ambos clientes comparten los mismos binarios, seguridad mTLS, Credential Provider, cuenta estándar, RustDesk, supervisión y autorreparación; el manifiesto impide ejecutar accidentalmente el paquete de la otra versión de Windows.
+- En clientes Hyper-V con dos NIC, el bootstrap selecciona la red privada sin puerta de enlace, solicita o acepta la IP fija del cliente, espera a que la dirección y WinRM estén disponibles y conserva en pantalla y archivo cualquier error de enrolamiento.
 - `sgu-linux-client-bootstrap-$Version.zip`: une clientes Debian/Ubuntu o RHEL/Fedora/Rocky/AlmaLinux con realmd, Kerberos y SSSD. Solicita interactivamente la contraseña de unión y no instala el Credential Provider de Windows.
 - `sgu-azure-infrastructure-$Version.zip`: despliega mediante Bicep una VM Windows Server 2025, red privada, IP pública protegida por NSG y Azure VPN Gateway P2S; también genera certificados por equipo y descarga el perfil de cliente.
 - El bootstrap Azure conserva la IP privada administrada por la NIC de Azure, autoriza el pool P2S en los firewalls SGU y nunca publica LDAP, Kerberos, SMB, RPC, WinRM ni el Auth Broker directamente a Internet.
@@ -119,6 +123,8 @@ Bootstrap reproducible para el laboratorio SGU.
 - El Auth Broker clasifica sin tareas programadas cada cuenta autenticada: `AL` se agrega a `SGU-Alumnos`, `AD` a `SGU-Administrativos` y `DO` a `SGU-Docentes`; el bootstrap crea cada grupo dentro de la OU de su rol y migra idempotentemente cualquier grupo heredado sin cambiar su SID.
 - El Auth Broker resuelve la dirección guardada de administrativos y docentes mediante `GetDireccion`, `GetLocalidadListado` y `GetColoniasListado`, evitando conservar los valores transitorios `Seleccione...` de los controles dinámicos de SGU.
 - El enrolamiento y la reparación de clientes Windows crean y verifican idempotentemente la cuenta local estándar `alumno`, sin pertenencia al grupo de administradores.
+- La descripción de la cuenta local administrada respeta el límite de 48 caracteres de Windows 10 Enterprise.
+- La validación de expiración de contraseña usa el indicador de cuenta compatible con Windows 10 y 11, en lugar de una propiedad que Windows 10 no expone.
 - El enriquecimiento obtiene el sexo de los módulos SGU de personal/alumnos, lo conserva como la línea administrada `SGU-Gender: Male|Female` en Notas de AD y adapta el fondo de Windows/Linux; cuando falta utiliza redacción neutral.
 - El servidor configura WEF/WEC para registrar sesiones y fallos, inventariar el estado alcanzable de las máquinas cada cinco minutos y conservar durante 183 días tanto esos eventos como el diagnóstico estructurado del Auth Broker.
 - Windows Home se detecta y se rechaza con una explicación, ya que no admite unión a Active Directory ni RDP host.

scripts/Set-SguStandardLocalUser.ps1

@@ -5,7 +5,15 @@ param()
 $ErrorActionPreference = 'Stop'
 $userName = 'alumno'
 $plainTextPassword = 'ingenieria'
-$description = 'Cuenta local estandar de recuperacion para equipos SGU'
+$description = 'Cuenta local estandar SGU para recuperacion'
+$passwordNeverExpiresFlag = 0x10000
+
+function Get-LocalUserFlags {
+    param([Parameter(Mandatory)][string]$Name)
+
+    $directoryEntry = [ADSI]("WinNT://$env:COMPUTERNAME/$Name,user")
+    return [int]$directoryEntry.InvokeGet('UserFlags')
+}
 
 $identity = [Security.Principal.WindowsIdentity]::GetCurrent()
 $principal = [Security.Principal.WindowsPrincipal]::new($identity)
@@ -40,6 +48,16 @@ try {
             -Description $description | Out-Null
     }
 
+    # Windows 10's Get-LocalUser object has PasswordExpires but does not expose
+    # PasswordNeverExpires. Enforce and verify the underlying UF_DONT_EXPIRE_PASSWD
+    # flag so the result is consistent across Windows 10 and Windows 11.
+    $directoryEntry = [ADSI]("WinNT://$env:COMPUTERNAME/$userName,user")
+    $userFlags = [int]$directoryEntry.InvokeGet('UserFlags')
+    if (($userFlags -band $passwordNeverExpiresFlag) -eq 0) {
+        $directoryEntry.InvokeSet('UserFlags', ($userFlags -bor $passwordNeverExpiresFlag))
+        $directoryEntry.CommitChanges()
+    }
+
     $user = Get-LocalUser -Name $userName -ErrorAction Stop
     $administratorsSid = [Security.Principal.SecurityIdentifier]::new('S-1-5-32-544')
     $usersSid = [Security.Principal.SecurityIdentifier]::new('S-1-5-32-545')
@@ -74,11 +92,16 @@ if (@($verifiedAdministrators).SID.Value -contains $verifiedUser.SID.Value) {
 if ($verifiedUsers.SID.Value -notcontains $verifiedUser.SID.Value) {
     throw "The local account '$userName' does not belong to the local Users group."
 }
+$verifiedPasswordNeverExpires =
+    ((Get-LocalUserFlags -Name $userName) -band $passwordNeverExpiresFlag) -ne 0
+if (-not $verifiedPasswordNeverExpires) {
+    throw "The local account '$userName' password is not configured to never expire."
+}
 
 [pscustomobject]@{
     UserName = $verifiedUser.Name
     Enabled = $verifiedUser.Enabled
     IsAdministrator = $false
     IsStandardUser = $true
-    PasswordNeverExpires = $verifiedUser.PasswordNeverExpires
+    PasswordNeverExpires = $verifiedPasswordNeverExpires
 }

scripts/Start-SguAzureClientEnrollment.cmd

@@ -4,5 +4,12 @@ set "SGU_BOOTSTRAP_IP=%~1"
 set "SGU_VPN_PACKAGE=%~2"
 set "SGU_VPN_PFX=%~3"
 set "SGU_VPN_ROOT=%~4"
-powershell.exe -NoLogo -NoProfile -ExecutionPolicy Bypass -Command "$script = Join-Path '%~dp0' 'Invoke-SguClientBootstrap.ps1'; $arguments = @('-NoLogo','-NoProfile','-ExecutionPolicy','Bypass','-File',('"' + $script + '"'),'-ConnectivityMode','AzureP2S'); if ($env:SGU_BOOTSTRAP_IP) { $arguments += @('-DomainControllerIPv4Address',('"' + $env:SGU_BOOTSTRAP_IP + '"')) }; if ($env:SGU_VPN_PACKAGE) { $arguments += @('-VpnProfilePackagePath',('"' + [IO.Path]::GetFullPath($env:SGU_VPN_PACKAGE) + '"')) }; if ($env:SGU_VPN_PFX) { $arguments += @('-VpnClientCertificatePfxPath',('"' + [IO.Path]::GetFullPath($env:SGU_VPN_PFX) + '"')) }; if ($env:SGU_VPN_ROOT) { $arguments += @('-VpnClientRootCertificatePath',('"' + [IO.Path]::GetFullPath($env:SGU_VPN_ROOT) + '"')) }; $process = Start-Process -FilePath powershell.exe -Verb RunAs -ArgumentList $arguments -Wait -PassThru; exit $process.ExitCode"
+powershell.exe -NoLogo -NoProfile -ExecutionPolicy Bypass -Command "$script = Join-Path '%~dp0' 'Invoke-SguClientBootstrap.ps1'; $arguments = @('-NoLogo','-NoProfile','-ExecutionPolicy','Bypass','-File',('"' + $script + '"'),'-PauseOnError','-ConnectivityMode','AzureP2S'); if ($env:SGU_BOOTSTRAP_IP) { $arguments += @('-DomainControllerIPv4Address',('"' + $env:SGU_BOOTSTRAP_IP + '"')) }; if ($env:SGU_VPN_PACKAGE) { $arguments += @('-VpnProfilePackagePath',('"' + [IO.Path]::GetFullPath($env:SGU_VPN_PACKAGE) + '"')) }; if ($env:SGU_VPN_PFX) { $arguments += @('-VpnClientCertificatePfxPath',('"' + [IO.Path]::GetFullPath($env:SGU_VPN_PFX) + '"')) }; if ($env:SGU_VPN_ROOT) { $arguments += @('-VpnClientRootCertificatePath',('"' + [IO.Path]::GetFullPath($env:SGU_VPN_ROOT) + '"')) }; $process = Start-Process -FilePath powershell.exe -Verb RunAs -ArgumentList $arguments -Wait -PassThru; exit $process.ExitCode"
-exit /b %errorlevel%
+set "SGU_EXIT_CODE=%errorlevel%"
+if not "%SGU_EXIT_CODE%"=="0" (
+  echo.
+  echo SGU Windows 11 Azure enrollment did not complete. Review:
+  echo C:\ProgramData\SGU\Bootstrap\Client\latest-error.log
+  pause
+)
+exit /b %SGU_EXIT_CODE%

scripts/Start-SguClientEnrollment.cmd

@@ -1,5 +1,14 @@
 @echo off
 setlocal
 set "SGU_BOOTSTRAP_IP=%~1"
-powershell.exe -NoLogo -NoProfile -ExecutionPolicy Bypass -Command "$script = Join-Path '%~dp0' 'Invoke-SguClientBootstrap.ps1'; $arguments = @('-NoLogo','-NoProfile','-ExecutionPolicy','Bypass','-File',('"' + $script + '"')); if ($env:SGU_BOOTSTRAP_IP) { $arguments += @('-DomainControllerIPv4Address',$env:SGU_BOOTSTRAP_IP) }; $process = Start-Process -FilePath powershell.exe -Verb RunAs -ArgumentList $arguments -Wait -PassThru; exit $process.ExitCode"
+set "SGU_CLIENT_IP=%~2"
-exit /b %errorlevel%
+set "SGU_NETWORK_ALIAS=%~3"
+powershell.exe -NoLogo -NoProfile -ExecutionPolicy Bypass -Command "$script = Join-Path '%~dp0' 'Invoke-SguClientBootstrap.ps1'; $arguments = @('-NoLogo','-NoProfile','-ExecutionPolicy','Bypass','-File',('"' + $script + '"'),'-PauseOnError'); if ($env:SGU_BOOTSTRAP_IP) { $arguments += @('-DomainControllerIPv4Address',$env:SGU_BOOTSTRAP_IP) }; if ($env:SGU_CLIENT_IP) { $arguments += @('-ClientIPv4Address',$env:SGU_CLIENT_IP) }; if ($env:SGU_NETWORK_ALIAS) { $arguments += @('-NetworkInterfaceAlias',('"' + $env:SGU_NETWORK_ALIAS + '"')) }; $process = Start-Process -FilePath powershell.exe -Verb RunAs -ArgumentList $arguments -Wait -PassThru; exit $process.ExitCode"
+set "SGU_EXIT_CODE=%errorlevel%"
+if not "%SGU_EXIT_CODE%"=="0" (
+  echo.
+  echo SGU client enrollment did not complete. Review the elevated window or:
+  echo C:\ProgramData\SGU\Bootstrap\Client\latest-error.log
+  pause
+)
+exit /b %SGU_EXIT_CODE%

scripts/Test-SguClientEnrollment.ps1

@@ -20,6 +20,7 @@ $interactiveLogonPolicyPath = 'HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion\P
 $settingsPath = Join-Path $env:ProgramData 'SGU\CredentialProvider\settings.json'
 $issues = [Collections.Generic.List[string]]::new()
 $standardLocalUserName = 'alumno'
+$passwordNeverExpiresFlag = 0x10000
 
 $computer = Get-CimInstance Win32_ComputerSystem
 if ($RequireDomainJoined -and -not $computer.PartOfDomain) {
@@ -93,8 +94,7 @@ $standardLocalUserPresent = [bool]$standardLocalUser
 $standardLocalUserEnabled = $standardLocalUserPresent -and $standardLocalUser.Enabled
 $standardLocalUserIsAdministrator = $false
 $standardLocalUserInUsersGroup = $false
-$standardLocalUserPasswordNeverExpires =
+$standardLocalUserPasswordNeverExpires = $false
-    $standardLocalUserPresent -and $standardLocalUser.PasswordNeverExpires
 if ($standardLocalUserPresent) {
     $administratorsSid = [Security.Principal.SecurityIdentifier]::new('S-1-5-32-544')
     $usersSid = [Security.Principal.SecurityIdentifier]::new('S-1-5-32-545')
@@ -106,6 +106,16 @@ if ($standardLocalUserPresent) {
         $administratorMembers.SID.Value -contains $standardLocalUser.SID.Value
     $standardLocalUserInUsersGroup =
         $standardMembers.SID.Value -contains $standardLocalUser.SID.Value
+    try {
+        $directoryEntry = [ADSI]("WinNT://$env:COMPUTERNAME/$standardLocalUserName,user")
+        $userFlags = [int]$directoryEntry.InvokeGet('UserFlags')
+        $standardLocalUserPasswordNeverExpires =
+            ($userFlags -band $passwordNeverExpiresFlag) -ne 0
+    }
+    catch {
+        # Report the account as invalid when Windows cannot read its flags.
+        $standardLocalUserPasswordNeverExpires = $false
+    }
 }
 if (-not $standardLocalUserPresent) {
     $issues.Add("The required standard local user '$standardLocalUserName' is missing.")
@@ -120,7 +130,7 @@ elseif (-not $standardLocalUserInUsersGroup) {
     $issues.Add("The required standard local user '$standardLocalUserName' does not belong to the local Users group.")
 }
 elseif (-not $standardLocalUserPasswordNeverExpires) {
-    $issues.Add("The required standard local user '$standardLocalUserName' does not retain its enrollment password.")
+    $issues.Add("The required standard local user '$standardLocalUserName' password is not configured to never expire.")
 }
 
 $settings = $null

tests/BootstrapNetwork.Tests.ps1

@@ -25,6 +25,22 @@ $networkFunctions = $serverAst.FindAll({
     }, $true)
 Invoke-Expression (($networkFunctions | ForEach-Object { $_.Extent.Text }) -join [Environment]::NewLine)
 
+$clientTokens = $null
+$clientParseErrors = $null
+$clientAst = [Management.Automation.Language.Parser]::ParseFile(
+    $clientBootstrapPath,
+    [ref]$clientTokens,
+    [ref]$clientParseErrors)
+if ($clientParseErrors.Count -gt 0) {
+    throw ($clientParseErrors -join [Environment]::NewLine)
+}
+$clientNetworkFunctions = $clientAst.FindAll({
+        param($node)
+        $node -is [Management.Automation.Language.FunctionDefinitionAst] -and
+            $node.Name -eq 'Test-IPv4AddressesSharePrefix'
+    }, $true)
+Invoke-Expression (($clientNetworkFunctions | ForEach-Object { $_.Extent.Text }) -join [Environment]::NewLine)
+
 Describe 'SGU public-cloud network safety' {
     It 'canonicalizes a host address to its IPv4 network' {
         ConvertTo-NetworkCidr -Address ([ipaddress]'10.77.0.4') `
@@ -56,6 +72,50 @@ Describe 'SGU public-cloud network safety' {
             'ConnectivityMode') | Should Be $true
         ((Get-Command $clientBootstrapPath).Parameters.Keys -contains
             'VpnProfilePackagePath') | Should Be $true
+        ((Get-Command $clientBootstrapPath).Parameters.Keys -contains
+            'CompatibilityProfile') | Should Be $true
+    }
+
+    It 'accepts an explicit static IPv4 address for a private Windows adapter' {
+        ((Get-Command $clientBootstrapPath).Parameters.Keys -contains
+            'ClientIPv4Address') | Should Be $true
+        ((Get-Command $clientBootstrapPath).Parameters.Keys -contains
+            'ClientPrefixLength') | Should Be $true
+    }
+
+    It 'matches a client and domain controller within the requested prefix' {
+        Test-IPv4AddressesSharePrefix -FirstAddress ([ipaddress]'192.168.50.11') `
+            -SecondAddress ([ipaddress]'192.168.50.10') -PrefixLength 24 |
+            Should Be $true
+        Test-IPv4AddressesSharePrefix -FirstAddress ([ipaddress]'192.168.51.11') `
+            -SecondAddress ([ipaddress]'192.168.50.10') -PrefixLength 24 |
+            Should Be $false
+        Test-IPv4AddressesSharePrefix -FirstAddress ([ipaddress]'10.77.15.20') `
+            -SecondAddress ([ipaddress]'10.77.0.4') -PrefixLength 16 |
+            Should Be $true
+    }
+
+    It 'prefers the private adapter instead of the Internet default route' {
+        $source = Get-Content -LiteralPath $clientBootstrapPath -Raw
+        $source | Should Match '\$withoutDefaultGateway\.Count -eq 1'
+        $source | Should Not Match "Get-NetRoute -AddressFamily IPv4 -DestinationPrefix '0\.0\.0\.0/0'"
+    }
+
+    It 'waits for the new address and WinRM route to stabilize' {
+        $source = Get-Content -LiteralPath $clientBootstrapPath -Raw
+        $source | Should Match "AddressState -eq 'Preferred'"
+        $source | Should Match 'function Wait-TcpPort'
+        $source | Should Match 'Wait-TcpPort -Address \$DomainControllerIPv4Address -Port 5985'
+    }
+
+    It 'keeps legacy and modern Windows package profiles isolated by build' {
+        $source = Get-Content -LiteralPath $clientBootstrapPath -Raw
+        $source.Contains("if (`$CompatibilityProfile -eq 'Windows10Legacy' -and `$windowsBuild -ge 22000)") |
+            Should Be $true
+        $source.Contains("if (`$CompatibilityProfile -eq 'Windows11Modern' -and `$windowsBuild -lt 22000)") |
+            Should Be $true
+        $source.Contains("if (`$CompatibilityProfile -eq 'Windows10Legacy' -and `$ConnectivityMode -eq 'AzureP2S')") |
+            Should Be $true
     }
 
     It 'uses an all-user machine-certificate VPN profile' {

tests/ClientEnrollmentScripts.Tests.ps1

@@ -0,0 +1,65 @@
+$repositoryRoot = (Resolve-Path (Join-Path $PSScriptRoot '..')).Path
+$localUserScriptPath = Join-Path $repositoryRoot 'scripts\Set-SguStandardLocalUser.ps1'
+$enrollmentTestScriptPath = Join-Path $repositoryRoot 'scripts\Test-SguClientEnrollment.ps1'
+$packageScriptPath = Join-Path $repositoryRoot 'scripts\New-SguBootstrapPackages.ps1'
+$releaseScriptPath = Join-Path $repositoryRoot 'scripts\Publish-GiteaRelease.ps1'
+$azureLauncherPath = Join-Path $repositoryRoot 'scripts\Start-SguAzureClientEnrollment.cmd'
+
+$tokens = $null
+$parseErrors = $null
+$scriptAst = [Management.Automation.Language.Parser]::ParseFile(
+    $localUserScriptPath,
+    [ref]$tokens,
+    [ref]$parseErrors)
+if ($parseErrors.Count -gt 0) {
+    throw ($parseErrors -join [Environment]::NewLine)
+}
+
+$descriptionAssignment = $scriptAst.Find({
+        param($node)
+        $node -is [Management.Automation.Language.AssignmentStatementAst] -and
+            $node.Left.Extent.Text -eq '$description'
+    }, $true)
+$description = $descriptionAssignment.Right.Extent.Text.Trim("'")
+
+Describe 'SGU Windows client enrollment scripts' {
+    It 'keeps the local-user description within the Windows 10 limit' {
+        ($description.Length -le 48) | Should Be $true
+    }
+
+    It 'declares the managed local student account' {
+        $source = Get-Content -LiteralPath $localUserScriptPath -Raw
+        $source | Should Match "\$userName = 'alumno'"
+        $source | Should Match "\$plainTextPassword = 'ingenieria'"
+    }
+
+    It 'uses the cross-version Windows account flag for password expiration' {
+        $localUserSource = Get-Content -LiteralPath $localUserScriptPath -Raw
+        $enrollmentTestSource = Get-Content -LiteralPath $enrollmentTestScriptPath -Raw
+        $localUserSource | Should Match '\$passwordNeverExpiresFlag = 0x10000'
+        $enrollmentTestSource | Should Match '\$passwordNeverExpiresFlag = 0x10000'
+        $localUserSource | Should Not Match '\$verifiedUser\.PasswordNeverExpires'
+        $enrollmentTestSource | Should Not Match '\$standardLocalUser\.PasswordNeverExpires'
+    }
+
+    It 'publishes separate legacy Windows 10 and modern Windows 11 artifacts' {
+        $packageSource = Get-Content -LiteralPath $packageScriptPath -Raw
+        $releaseSource = Get-Content -LiteralPath $releaseScriptPath -Raw
+        $packageSource | Should Match 'sgu-windows10-legacy-client-bootstrap-\$Version'
+        $packageSource | Should Match 'sgu-windows11-client-bootstrap-\$Version'
+        $packageSource | Should Match '-CompatibilityProfile Windows10Legacy'
+        $packageSource | Should Match '-CompatibilityProfile Windows11Modern'
+        $releaseSource | Should Match 'sgu-windows10-legacy-client-bootstrap-\$Version\.zip'
+        $releaseSource | Should Match 'sgu-windows11-client-bootstrap-\$Version\.zip'
+    }
+
+    It 'keeps Azure P2S in the modern Windows 11 artifact' {
+        $packageSource = Get-Content -LiteralPath $packageScriptPath -Raw
+        $azureLauncher = Get-Content -LiteralPath $azureLauncherPath -Raw
+        $packageSource.Contains("Join-Path `$windows11ClientRoot 'Start-SguAzureClientEnrollment.cmd'") |
+            Should Be $true
+        $packageSource.Contains("Join-Path `$windows10ClientRoot 'Start-SguAzureClientEnrollment.cmd'") |
+            Should Be $false
+        $azureLauncher | Should Match '-PauseOnError'
+    }
+}